ATLAM OFF-SHORE > PRODUTOS
| Grau M e T | Carga | Grau 8 | Super | Extra Pesada |
Manilhas de Carga
Manilha Grau M e Grau T – AMA
| TrabalhoCarga de (Ton.) | Ø | Olhais entre Abertura | Interno Comprimento 5% | Pino Diâmetro do D | Olhal Externo do diâmetro | |||
| Grau M | Grau T | W | L | Max | Min. | E | ||
| T | T | mm | Pol. | reta | ||||
| 0,25 | 0,5 | 6,0 | 1/4 | 11 | 22 | 8,0 | 7,7 | 17 |
| 0,40 | 0,8 | 8,0 | 5/16 | 14 | 28 | 10,0 | 9,3 | 21 |
| 0,60 | 1,2 | 9,5 | 3/8 | 17 | 34 | 13,0 | 12,4 | 28 |
| 1,00 | 2,0 | 13,0 | 1/2 | 21 | 44 | 16,0 | 15,5 | 35 |
| 1,60 | 3,2 | 16,0 | 5/8 | 26 | 55 | 19,2 | 18,7 | 42 |
| 2,50 | 5,0 | 19,0 | 3/4 | 33 | 69 | 23,0 | 21,9 | 50 |
| 3,20 | 6,3 | 22,0 | 7/8 | 37 | 78 | 26,0 | 24,9 | 56 |
| 4,00 | 8,0 | 25,0 | 1 | 42 | 87 | 29,0 | 27,9 | 63 |
| 5,00 | 10,0 | 28,0 | 1.1/8 | 46 | 97 | 32,0 | 31,0 | 70 |
| 6,30 | 12,5 | 32,0 | 1.1/4 | 53 | 109 | 35,0 | 34,1 | 77 |
| 8,00 | 16,0 | 35,0 | 1.3/8 | 59 | 123 | 39,0 | 37,5 | 85 |
| 10,00 | 20,0 | 38,0 | 1.1/2 | 66 | 138 | 42,0 | 40,5 | 91 |
| 12,50 | 25,0 | 45,0 | 1.3/4 | 74 | 154 | 51,0 | 49,5 | 112 |
| 16,00 | 32,0 | 51,0 | 2 | 83 | 174 | 58,0 | 56,6 | 128 |
| 20,00 | 40,0 | 57,0 | 2.1/4 | 93 | 195 | 64,0 | 62,0 | 140 |
| 25,00 | 50,0 | 63,0 | 2.1/2 | 104 | 218 | 70,0 | 68,0 | 154 |
| 32,00 | 63,0 | 70,0 | 2.3/4 | 118 | 247 | 76,0 | 74,0 | 168 |
| 40,00 | 80,0 | 76,0 | 3 | 131 | 275 | 83,0 | 81,0 | 182 |
| 50,00 | 100,0 | 88,0 | 3.7/8 | 147 | 308 | 96,0 | 94,0 | 211 |
| 63,00 | 125,0 | 101,0 | 4 | 165 | 346 | 108,0 | 106,0 | 237 |
| 80,00 | 160,0 | 114,0 | 4.1/2 | 186 | 390 | 127,0 | 125,0 | 279 |
| Fator de Segurança 5:1 | ||||||||
Obs: Observe que as manilhas apesar de terem as mesmas medidas, se diferenciam pelas cargas (Grau M e Grau T).
| Grau M e T | Carga | Grau 8 | Super | Extra Pesada |
Manilha de Carga – AMA
| Ø | Carga de TrabalhoTon. | Abertura entre Olhais | Comp. Interno 5% | Diâmetro do Pino D | Diâmetro Externo do Olhal | ||||
| d | Grau | W | 2r | L | Max. | Mín. | E | ||
| mm. | pol. | M | T | curva | |||||
| 6,0 | 1/4 | 0,25 | 0,50 | 11 | 14 | 25 | 8,0 | 7,7 | 17 |
| 8,0 | 5/16 | 0,40 | 0,80 | 14 | 18 | 32 | 10,0 | 9,3 | 21 |
| 9,5 | 3/8 | 0,63 | 1,20 | 17 | 22,4 | 39 | 13,0 | 12,4 | 28 |
| 13,0 | 1/2 | 1,00 | 2,00 | 21 | 28 | 50 | 16,0 | 15,5 | 35 |
| 16,0 | 5/8 | 1,60 | 3,20 | 26 | 35,5 | 63 | 19,2 | 18,7 | 42 |
| 19,0 | 3/4 | 2,50 | 5,00 | 33 | 45 | 78 | 23,0 | 21,9 | 50 |
| 22,0 | 7/8 | 3,20 | 6,30 | 37 | 50 | 89 | 26,0 | 24,9 | 56 |
| 25,0 | 1 | 4,00 | 8,00 | 42 | 56 | 99 | 29,0 | 27,9 | 63 |
| 28,0 | 1.1/8 | 5,00 | 10,00 | 46 | 63 | 111 | 32,0 | 31,0 | 70 |
| 32,0 | 1.1/4 | 6,30 | 12,50 | 53 | 71 | 124 | 35,0 | 34,1 | 77 |
| 35,0 | 1.3/8 | 8,00 | 16,00 | 59 | 80 | 140 | 39,0 | 37,5 | 85 |
| 38,0 | 1.1/2 | 10,00 | 20,00 | 66 | 90 | 157 | 42,0 | 40,5 | 91 |
| 45,0 | 1.3/4 | 12,50 | 25,00 | 74 | 100 | 175 | 51,0 | 49,5 | 112 |
| 51,0 | 2 | 16,00 | 32,00 | 83 | 112 | 198 | 58,0 | 56,6 | 128 |
| 57,0 | 2.1/4 | 20,00 | 40,00 | 93 | 125 | 221 | 64,0 | 62,0 | 140 |
| 63,0 | 2.1/2 | 25,00 | 50,00 | 104 | 140 | 248 | 70,0 | 68,0 | 154 |
| 70,0 | 2.3/4 | 32,00 | 63,00 | 118 | 160 | 280 | 76,0 | 74,0 | 168 |
| 76,0 | 3 | 40,00 | 80,00 | 131 | 180 | 313 | 83,0 | 81,0 | 182 |
| 88,0 | 3.7/8 | 50,00 | 100,00 | 147 | 200 | 350 | 96,0 | 94,0 | 211 |
| 101,0 | 4 | 63,00 | 125,00 | 165 | 224 | 394 | 108,0 | 106,0 | 237 |
| 114,0 | 4.1/2 | 80,00 | 160,00 | 186 | 250 | 444 | 127,0 | 125,0 | 279 |
| Fator de Segurança 5:1 | |||||||||
| Grau M e T | Carga | Grau 8 | Super | Extra Pesada |
Manilha Especial Grau 8 – AMA
| Carga de Trabalho (Ton.) | Ø doCorpo (mm) | Abertura entre Olhais (mm) | Comprimento Interno L (mm) | Diâmetro do Pino (mm) | |
| CT | d | W | Reta | Curva | D |
| 0,33 | 5,0 | 9,5 | 19 | 22,0 | 6 |
| 0,50 | 7,0 | 12,0 | 25 | 29,0 | 8 |
| 0,75 | 9,0 | 13,5 | 27 | 32,0 | 10 |
| 1,00 | 10,0 | 17,0 | 31 | 36,5 | 11 |
| 1,50 | 11,0 | 18,5 | 37 | 43,0 | 12 |
| 2,00 | 13,5 | 22,0 | 43 | 51,0 | 16 |
| 3,25 | 16,0 | 27,0 | 51 | 64,0 | 19 |
| 4,75 | 19,0 | 31,0 | 59 | 76,0 | 22 |
| 6,50 | 22,0 | 36,0 | 73 | 83,0 | 25 |
| 8,50 | 25,0 | 43,0 | 85 | 95,0 | 28 |
| 9,50 | 28,0 | 47,0 | 90 | 108,0 | 32 |
| 12,0 | 32,0 | 51,0 | 94 | 115,0 | 35 |
| 13,5 | 35,0 | 57,0 | 115 | 133,0 | 38 |
| 17,0 | 38,0 | 60,0 | 127 | 146,0 | 42 |
| 25,0 | 45,0 | 74,0 | 149 | 178,0 | 50 |
| 35,0 | 50,0 | 83,0 | 171 | 197,0 | 57 |
| 42,5 | 57,0 | 95,0 | 190 | 222,0 | 65 |
| 55,0 | 65,0 | 105,0 | 203 | 254,0 | 70 |
| 85,0 | 75,0 | 127,0 | 230 | 330,0 | 80 |
| 120,0 | 89,0 | 146,0 | 267 | 381,0 | 95 |
| Fator de Segurança 6:1 | |||||
| Grau M e T | Carga | Grau 8 | Super | Extra Pesada |
Manilha Super – AMA-6
| Carga de Trabalho (Ton.) | Ø doCorpo (mm) | Abertura entre Olhais (mm) | Comprimento Interno L (mm) | Diâmetro do Pino (mm) |
| CT | d | W | Curva | D |
| 30 | 38,0 | 60,0 | 146,0 | 42,0 |
| 40 | 45,0 | 74,0 | 178,0 | 50,0 |
| 50 | 50,0 | 83,0 | 197,0 | 57,0 |
| 80 | 65,0 | 105,0 | 254,0 | 70,0 |
| 110 | 75,0 | 127,0 | 330,0 | 80,0 |
| 140 | 89,0 | 146,0 | 381,0 | 95,0 |
| 175 | 102,0 | 165,0 | 400,0 | 108,0 |
| 200 | 108,0 | 177,8 | 541,3 | 120,7 |
| 250 | 120,7 | 200,2 | 571,5 | 130,2 |
| 300 | 130,2 | 209,6 | 647,7 | 146,0 |
| 400 | 146,0 | 228,6 | 768,4 | 155,6 |
| 500 | 155,6 | 251,0 | 774,7 | 171,5 |
| 750 | 203,2 | 340,0 | 825,5 | 216,0 |
| 1000 | 241,3 | 393,7 | 990,6 | 254,0 |
| Fator de Segurança 5:1 | ||||
Obs: Somente tipo curva (Manilha Extra Pesada – AMA-6)
| Grau M e T | Carga | Grau 8 | Super | Extra Pesada |
Manilha Extra Pesada – AMA-6
| Carga Máxima de Trabalho | Diâmetro do Corpo | Diâmetro do Pino | Abertura entre Olhais | Compr. Interno Tipo Curva | Diâmetro Interno do Arco | Peso Aproximado por peça |
| d | D | W | L | 2r | Parafuso Porca e Contrapino | |
| Ton. | mm | mm | mm | mm | mm | kg |
| 150 | 102 | 108 | 165 | 400 | 275 | 160 |
| 200 | 120 | 130 | 175 | 500 | 290 | 235 |
| 250 | 125 | 140 | 200 | 540 | 305 | 285 |
| 300 | 135 | 150 | 200 | 600 | 305 | 340 |
| 400 | 165 | 175 | 225 | 650 | 325 | 560 |
| 500 | 175 | 185 | 250 | 700 | 350 | 685 |
| 600 | 195 | 205 | 275 | 700 | 375 | 880 |
| 700 | 205 | 215 | 300 | 700 | 400 | 980 |
| 800 | 210 | 220 | 300 | 700 | 400 | 1100 |
| 900 | 220 | 230 | 320 | 700 | 420 | 1280 |
1000 |
230 | 240 | 340 | 700 | 420 | 1460 |
Obs: Estes tipos de manilhas poderão ser fornecidos com sociedade classificadora.Fator de segurança 5x1 gravadas em relevo.
| Grau M e T | Carga | Grau 8 | Super | Extra Pesada |
Copyright © 2006 - Atlam Off-Shore - Todos os direitos reservados